April 21, 2016
Here are some tips of how to read read ecu med 17.5 withXhorse VVDI 2 commander, especially for solution of error messages "can not Access to service provider" and needing "condor automatic key cutting machine"
tool:Xhorse VVDI 2
Howto do it?:use VVDI 2 read ecu med 17.5
error message 1:
failed can not Access to service provider
error message 2(sometimes):
Get PIN, CS, MAC from internet
This function only authorize forcondor automatic key cutting machine
VVDI VAG
ool
VVDI2 for BMW CAS4+
engineer suggestion:this
VVDI VAG
ool
VVDI2 for BMW CAS4+
function should be performed /bound withCNC machineMore Relation Article SearchWOBD2 Official Blog
Posted by: UOBD2autel at
08:51 AM
| No Comments
| Add Comment
Post contains 128 words, total size 3 kb.
April 18, 2016
Some released Ford IDS 99.03 and Mazda IDS 99.02 in the forum. Here’s their software- IDS 99 for FREE download.
Free download:
FordIDSv99.03+calibrationv81VMware12(developed)
Driver for VXDIAG VCX NANO/ VCM 2 (developed&tested)
workable device can be try to test with:
VXDIAG VCX NANO for FORD / MAZDA (original)
VXDIAG VCX NANO
NOTE: technicians haven’t tested yet, please try be responsible for your try.
Posted by: UOBD2autel at
10:04 AM
| No Comments
| Add Comment
Post contains 73 words, total size 3 kb.
April 16, 2016
ICOM A2 Hardware Update File
Description
Xprog V5. 55 M BOX ECU Programmer
Foxwell NT500 VAG Scanner
Posted by: UOBD2autel at
07:28 AM
| No Comments
| Add Comment
Post contains 357 words, total size 5 kb.
April 15, 2016
Here,wobd2.comoffers all useful information aboutPorschePIWIS Tester II v16.2Development Mode, including tools suggestion, dev mode functions and vehicles (e.g. Cayenne 92A MY 2011).
Porsche tools for Development Mode
Porsche tester 2 with PCB of quality A
- laptop suggestion:Panasonic laptop CF30
- CPU: L7500RAM: 4G
Display: 13.3†HD LED
Guarantee: 3 Months
Piwis Tester 2 Development Mode Setup
1.TOOLS------Online Update
2.Select Development Mode (E mode) if you use other mode (Aftersales: V mode/ Production: P mode) before. Then save data.
3.Click Yes, then to close
Porsche Piwis 2 Development Modesupport functions
1.Start/stop "LAST MODE" waiting for the flame to change memory
2.Spoiler "advance speed
3.Spoiler "fixed"
4.Spoiler "angle changed"
- Active implementation plan VO code changes
- Air pump closed
- Power upgrade
- Tire pressure sensor remove
- Installation of reversing camera
- Install USB/BT
- Seat belt warning turn off
12.CDR/PCM interface change
- Air conditioning in memory
14.CDR_AUX Function enabled
15.PCM_ Function enabled
- Manual set codes
- Auto set code
- Manual programming
- Automatic programming without program rules
PIWIS II support vehicles
- 911(997)(991)
2.Boxster/Cayman(987)
3.CayenneuptoMY2010
4.CayennefromMY2011
5.Panamera
Piwis 2 Dev ModeDIY Guide
- NOTE 1: Please first install WinRAR and Winhex on your computer. Then to do setup as follows.
1. Locate the file: C:\Program Files\Porsche\PIDT_P_MIG_DLSS3\pidt\plugins\de.dsa.pidt.datatype.jar and copy it on your desktop in order to modify it.
2. Open it with WinRAR, and then in the WinRAR windows locate the file:
\de\dsa\pidt\datatypes\utils\Helper$1.class and drag it on your desktop, then delete it from the archive after the copy, and keep the WinRAR window open.
3. Open Helper$1.class on your desktop with Winhex and go to offset E81, replace 9A by A7 and save.
4. Drag back the save file on the WinRAR window still open and click OK. Now Close WinRAR.
5. Copy the new file de.dsa.pidt.datatype.jar you just made in C:\Program Files\Porsche\PIDT_P_MIG_DLSS3\pidt\plugins, and overwrite it.
6. Copy the file aftersales.sig on your desktop and rename it development.sig Copy this file back in the folder.
Aftersale.sig is located in C:\Program Files\Porsche\PIDT_P_DLS3\Pidt\workspace
and in C:\Program Files\Porsche\PIDT_P_MIG_DLS3\Pidt\workspace
7. Do exactly the same method given above with the folder
C:\Program Files\Porsche\PIDT_P_DLSS3 with its own files.
To transform it in developer:
Settings > Diagnostic configuration > 981-991 > mode > operating mode
E= development, P= production, V= aftersales (RegularPIWIS II)
Other models line > mode > operating mode
E= development, P= production, V= aftersales (Regular PIWIS II)
E= Entwickler, P= Produktion, V= Verkauf (Standarteinstellung PIWIS II)NOTE 2: The Development Mode DIY guide here is a cutomer solution; wobd2 has not tested yet and you may be at risks to hav a try. Good luck.
Piwis 2 Dev modeon Cayenne 92A MY 2011
" width="1019" height="539" data-mce-src="http://blog.wobd2.com/wp-content/uploads/2016/04/piwis-2-dev-mode-8.jpg" /> " width="1018" height="643" data-mce-src="http://blog.wobd2.com/wp-content/uploads/2016/04/piwis-2-dev-mode-18.jpg" />
Attachment:Developer Manual for PIWIS II(German)
Original Source:http://blog.wobd2.com/2016/04/14/wifi-piwis-tester-ii-development-mode-its-all-here/Please give credit to the original author when you use it elsewhere.
Posted by: UOBD2autel at
09:16 AM
| No Comments
| Add Comment
Post contains 487 words, total size 18 kb.
April 14, 2016
Only 75 USDto buy the El-50448 TPMS tool and haved done TPMS tire learn on my 2012Chevy Sonic.
Here is my TPMS tire learn procedure.
Start from the front-left wheel
Make the Diagnostic ToolEL-50448antenna up against the valve core position & close to the rim of the tire sidewall
El-50448tire pressure toolstarts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once
Note:
A sensor re-learn procedure must be performed after tire rotations, remote control door lock reveiver module replacement or tire pressure sensor replacement
Alll i did refer toEl-50448 Tire Pressure Sensor TPMS OEC-T5 User Manual
Kess v2 truck
KESS V2 TuningV2.15 OBD2 Tuning Kit
Posted by: UOBD2autel at
06:38 AM
| No Comments
| Add Comment
Post contains 139 words, total size 6 kb.
April 13, 2016
Mangoose
VCI
JLR
mangoose pro
Key Pro M8
TECH-TOOL SOURCING CO.,LTD was founded in 2001 with it’s office in the center of Shanghai. We specialize in manufacturing & exporting power tool accessories, hand tools, hardwares and many different kinds of tool sets. Under the leadership of our President Mr. Anqi and a devoted team here at TECH-TOOL our company has now developed to be one of the leading tool sourcing companies in China.
Tech Tool (TT) PTTis a tool that supports the repair and diagnostic process. It was developed to make repair shop tasks easier and more efficient. TT can be used in the repair shop, out in the field, at the roadside, or during test drives. TT is a diagnostics application that covers the whole repair process through the use of plug-ins. With TT you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. TT also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.
Volvo/Renault/Mack Premium Tech Tool PTT 2.04.55 (FH4-FM4) (With APCI+ Update)
Top 6 Reasons to Get PTT 2.04.55 Software:
1. work with nexiq, xtruck, DPA4+, DPA5,Vocom, 88890020, Noregon
2. It can work 2015 trucks,
3. All Euro6 truck
4. with dpa work only via usb
The Basic Workflow in Tech Tool is the Same for All Products:
• Identify a product.
• View information history.
• Diagnose a selected product.
• Test a selected product.
• Program a selected product.
• Calibrate a selected product.
Supported Companies and Electrical Systems:
• Volvo Trucks (Older electrical system, Vehicle electronics ’98, VERSION2, VERSION3, VERSION4)
• Volvo Trucks (VERSION4 – FH4/FM4);
• Volvo Buses (Conventional, Multiplexed, Multiplexed version 2, Multiplexed version 3)
• Volvo Construction Equipment
• Volvo Penta (VERSION2, VERSION3)
• Volvo OEM Component Customer (VERSION2, VERSION3);
• Mack Trucks (V-MAC I/II/III ITC, V-MAC IV, V-MAC IV+)
• Renault Trucks (VERSION2, VERSION3, VERSION4);
• UD Trucks (VERSION2, VERSION3, VERSION4)
tt-2-04-compatible-adapter-matrix.pdf
Tech Tool 2 Training Video For Mac
Tech Tool 2 Training Video For Volvo
More information please search:
http://www.wobd2.com/wholesale/volvo-renault-mack-premium-tech-tool.html
Posted by: UOBD2autel at
06:09 AM
| No Comments
| Add Comment
Post contains 373 words, total size 6 kb.
April 12, 2016
This is the professional suggestion ofkey programmers for new and old cars in the market. Auto key tools- key pro m8, T300, skp900, are listed here.
1. cars before 2008 --> Key Pro M8
2. cars before 2006 (expcept Ford) --> T300
3. cars after 2008 --> SKP-900
Key Pro M8for cars before 2008
(best feedback)
Price:$1,499
Version:
- Standard version:V11.13
- Beta version:V11.17(Newer function for toyota)
Tokens:
Come with 800 tokens, and pay for more:
Buy 50 Tokens,Get Total 150 Tokens
Buy 100 Tokens, Get Total 300 Tokens
Buy 250 Tokens, Get Total 750 Tokens
Guide:How to Add the Tokens for Key Pro M8
Update: (click to download)
Key Pro M8 Update Tool
Function:
- Provide Roadside Programming For Drivers
- Read & Clear Fault Codes
- Clear Key Memory
- Program Keys
- Program Proximity / Smart Keys
- Program Remote / Plip Keys
- Program Aftermarket & OEM Keys
- Program Aftermarket & OEM Remote Key Fob's
- Read Immobiliser Pin Codes
- Read Pre-Code Data
- Display Live Data
- Component Actuation
- ECU Identification
- Simple User Interface
Supported vehicles:
cars before 2008
T300 key programmer for cars before 2006
(expcept FORD, GM and Holden)
Price:$114
Tokens:
No need tokens
Function:
-Read the vehicle malfunction code
-Clear the vehicle malfunction code
-Read the system data stream
-Read IMM0/ECU ID
-Fetch the machinery key code
-Clear vehicle key memory
-Program new key
-Read vehicle key login password
-Distinguish types of ECU
-ECU-IMMOBILISER programme
-Read EKA password
-Programme new EKA password
-Programme telecontrol implement
Supported vehicles:
cars before 2006 (expcept FORD, GM and Holden)
T300 key programmer vehicle list.pdf
SuperOBD SKP-900 key programmer v4.0 for new cars after 2008
(cost-effective)
Price:$599
Tokens:
No token limitation
Free tokens to add and use
Guide:how-to-add-free-tokens-for-skp900
Function:
- Program new key
Don't need pincode when programming keys for many vehicles
- read pin code for many vehicles, only a few vehicles need to get pincode from other place
- update quickly
Supported vehicles:
new cars after 2008
For Japan cars, choosex-100+better
SKP-900 Key Programmer Vehicle List.pdf
For more news of vehicle tool please search
Posted by: UOBD2autel at
09:10 AM
| No Comments
| Add Comment
Post contains 398 words, total size 8 kb.
April 11, 2016
I hadFoxwell NT500VAG scan toolfor $180 + shipping from Shenzhen, China.
I tested it and verified it is able to coding e.g disable the seat belt chime on my 2008 A4.
How to disable the seat belt chime on 2008 A4 using Foxwell NT500 VAG scan tool? Go on reading following parts, I screenshot the whole procedure as follows.
Step – by – step procedure:
Go to option "System†, choose "Instrumentsâ€.
Go to "Function Menuâ€, choose "Codingâ€
Go to "Codingâ€, choose "Software Codingâ€
Instrument Cluster (J285) Coding, choose "Okâ€
Complete explanation of code values:
Input new code using keyboard:
I had to edit all of the other values and set them to their current values otherwise it says "Coding Not Complete":
Coding success:
The ECU information displays, click "Saveâ€
Done!
Hope it helps!
Posted by: UOBD2autel at
09:31 AM
| No Comments
| Add Comment
Post contains 205 words, total size 9 kb.
April 08, 2016
This is the instruction on how to change vehicle order (VO) with NCS Expert, on BMW vehicles except F series.
VO modify tools:
(for BMW F series, you needENET cable+E-sys)
steps to modify VO:
1.InNCS Expert, load the Expertmode profile.
1
2.Press F1 or the VIN/ZCS/FA button.
2
3.Press F3 or the ZCS/FA f. ECU button.
3
4.In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button.
4
5.In the Choose ECU pop-up window, choose the CAS ECU and press the OK button.
5
6.The model (CHASSIS), VIN number (FG), and VO (FA) should be displayed in NCS Expert.
6
7.Press F2 or the Enter FA button to modify the VO.
8.In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button.
9.In the Enter VIN pop-up window, verify that the Vin listed is the correct VIN number for the vehicle. The last digit attached to the VIN number is a checksum. You should not have to change anything on this step. Just verify and press the OK button.
10.In the Enter FA pop-up screen, for the Attribute text field, input the SA or Service Code. After typing in the code, press the Add button, and verify that the code was listed in the list of FA codes. After verifying, press the OK button.
-SA codes will begin with a "$â€
-Service Codes will begin with a "+â€
11.Press F6 or the Back button.
12.Press F4 or Process ECU button.
13.For the Choose ECU pop-up window, select CAS and press the OK button.
14.Press F2 or the Change job button.
15.From the Choose job pop-up window, select FA_WRITE and press the OK button.
16.Under "get coded:â€, verify that CAS is the ECU selected to get coded. Also verify the JOBNAME is equal to FA_WRITE, and then press F3 or the Execute job button.
17.After the job has ended, we need to also write the new VO to the LMA ECU so that it will be both wrote to the CAS and LMA ECU. Press F1 or Change ECU button.
18.From the Choose ECU pop-up window, choose the LMA ECU and press the OK button.
19.Under "get coded:â€, verify that LMA is the ECU selected to get coded. Also verify the JOBNAME is equal to FA_WRITE, and then press F3 or the Execute job button.
20.After the coding has ended, you can exit out of NCS Expert.
blog.wobd2.comis the original author. Please give credit to the original author when you use it elsewhere.
Posted by: UOBD2autel at
07:19 AM
| No Comments
| Add Comment
Post contains 446 words, total size 4 kb.
April 06, 2016
Auto key programmer became more and more improtant in auto field
But how to choose a better one became many owner questions
This is the new OBD II adapter with OBD cable, to works on almost European, American, Janpese and China cars, and compatible withDigimaster III odometer correction toolandCKM100 auto key programmer
Compatible device:
Original YanhuaDigimaster 3Odometer Correction Master
Special function:
Support key programming via OBD II plug, applicable for most Japanese & Korean cars, Chinese cars, EU cars and American cars.
OBD II applicable vehicle list:
Japanese & Korean cars:
1.Honda 2.Toyota 3.Subaru 4.Nissan 5.Lexus 6.Mitsubishi 7.KIA 8.Mazda
9.Hyundai etc.
Chinese cars:
- Jinbei 2.LIFAN 3.LANDWIND 4.JAC 5.Geely 6.FAW BESTURN 7.Dongfeng-Nissan
8.SMA 9.Shanghai ENGLON 10.Dongfeng Liuzhou Motor 11.Changfeng LEOPAARD 12.Tianjin-FAW 13.Hongqi Shengshi 14.GreatWALL 15.LOTUS 16.Hainan-Mazda 17.Chery etc.
Other cars:
- Renault 2.Peugeot 3.Cirtroen 4.FIAT 5.Cadillac 6.GM 7.Ford etc.
Notice: 1.OBD II adapter should be used with CKM100 or DIGIMASTER III
- Connect to internet for upgrade.
Tokens foryanhua OBDII adpater:
This OBDII adpater will require software update and be used with tokens. Here is the module price list for tokens
Modules Price List( tokens) | |||
Module ID | Description | Function | Buy-out Price(tokens) |
07CB | Acura/Honda IMMO | IMMO system, intelligent card system, 9thgeneration key system, Button-push intelligent card, 3-pins diagnosis plug | 10 |
07FE | Nissan IMMO | IMMO system, intelligent card system, Nissan MARCH/SUNNY I/TIIDA(2010-), Imported Nissan code calculator | 8 |
0187 | Mistubishi IMMO | Lancer-ex, OUTLANDER EX(2004), L200TRITON, OUTLANDER EX, 10thgeneration intelligent card, ASX intelligent card and remote | 8 |
018B | Subaru | Key type A, Key type C | 2 |
07F3 | Mazda | Mazda 2/3/5/NEW CX-7/CX-5/CX-9, ATENZA, Axela, Mazda 6/ Core-wing/8/CX-7 | 8 |
07D0 | Hyundai/KIA IMMO |
Accent, COUPE, ELANTRA, ELANTRA, ELANTRA, New ELANTRA, I30,IX35, Santafe, Santa Fe, Sonata, SONATA NF, Tucson, New Veloster, Verna
|
10 |
0275 | Toyota/Lexus IMMO | IMMO system, old intelligent card, Crown intelligent card, intelligent card CANBUS, remote system, change panel language | 8 |
07F4 | Chery | A1/A3/A5/A6/A13 series, E3, COWIN(A15), FULWIN 2, EASTART(B11)/ (cross), QQ6, QQme, Karry, Tiggo 3, Riich 2, Riich M1/M2/M3/M5/X1/X5 | 20 |
Geely | Ziyoujian, Vision, Jinying, FC-2, EMGRAND | ||
SMA | Haijing, Haishang, Haifeng, Haiyue, Marindo, Hysoon | ||
Shanghai ENGLON | IMMO system, remote system | ||
0812 | GreatWall | HAVAL, Tengyi, COWRY, PERI, FLORID, Wingle, Cool Bear, C10 | 25 |
Changfeng LEOPAARD | LEOPAARD CS6, LEOPAARD CS7 | ||
Hainan Mazda | ha/ma 7, New Preema, Family, Happin, S7 | ||
PROTON | |||
0199 | CHANA | CX20,CX30,CS35,CS75, Benben, HEV, Zhixiang, Alsvin, EADO, RAETON, CM7, CM8, Honor | 25 |
CHANA SUZUKI | Swift, SX4, New Alto, VITARA | ||
Brilliance Auto | H330, V5 | ||
Zotye | 5008,Z300 | ||
0189 | BYD | Remote system(F3), intelligent card system | 10 |
Dongfeng-Nissan | IMMO system | ||
Dongfeng Liuzhou Motor | Dongfeng Fengxing - JOYEAR(B11) | ||
LOTUS | IMMO system, remote system | ||
07F8 | FAW BESTURN | BESTURN B50 | 10 |
Tianjin-FAW | Junpai D60, XIALI N5, XIALI N7, Xenia S80, New Vizi V5, Vizi(MT3 Delphi), Vela(MT3 Delphi) | ||
Honagqi Shengshi | Intelligent card matching | ||
Beijing Auto | E130,E150 | ||
07F5 | Jinbei | 10 | |
JAC | Binyue, Heyue, Tongyue, Refine | ||
LIFAN | IMMO system | ||
LANDWIND | Fashion, Fenghua, X6, X8 | ||
HAFEI | IMMO system 1 |
For more information about product search:
blog.wobd2.comis the original author. Please give credit to the original author when you use it elsewhere.
Posted by: UOBD2autel at
07:01 AM
| No Comments
| Add Comment
Post contains 531 words, total size 10 kb.
April 02, 2016
Good news for Digimaster 3 and CKM100 users fromwobd2.com
Digimaster 3 and CKM100 Tokens on sale, pay tokens and get free CAS4+ authorize and BDM programmer
Details as follows:
Tokens are a pain but cheap ,spend $319 on 200 tokens and get BMW CAS4+ Authorize Package free, spend $479 on 300 tokens and get BMW CAS4+ Authorize Package and Super BDM Programmer for Free, thats alot of tokens making it very cheap to use during the sales period, thatsless than 1usd a tokenonly.
Pay 200 tokens:
http://www.wobd2.com/wholesale/buy-200-tokens-for-digimaster-3-ckm100-get-free-bmw-cas4-authorize-package-463.html
Pay 300 Tokens:
http://www.wobd2.com/wholesale/tokens-for-digimaster3.html
To buy only Super BDM Programmer for digimaster 3, it cost $79 free shipping, to buy BMW CAS4+ Authorize Package, it cost $400 free shipping.
More details onBMW CAS4+ Authorize package
Procedure to get CAS4+ Authorize:
Please contact mail at: sales@wobd2.com and send customer service your serial number after paid, auobd2shop engineer will open the authorization for you and then you can update your device. This offer no need shipping.
BMW CAS4+ Authorize package is especially for customer who has Digimaster 3 or CKM100. Also you need buy Super BDM Adapter and BAV Key adapter to works together.
With BMW CAS4+ Authorize package, you can do BMW Key programming on the following vehicles:
1. BMW 1 series F20 (2011-) CAS4+ car key programming
2. BMW 5 series F10/F11/F18 (2010-) CAS4+ car key programming
3. BMW 5 series GT F07 (2010-) CAS4+ car key programming
4. BMW 6 series F12/F13 (2011-) CAS4+ car key programming
5. BMW 7 series F0x (2008-) CAS4+ car key programming
6. BMW X1 (2010-) CAS4+ car key programming
7. BMW X3 F25 (2011-) CAS4+ car key programming
CAS BDM Programmerfunctions and supported models:
CAS BDM Programmer is used to read and program BMW CAS 1/2/3/3+/4, and BENZ series EIS CPU data. CAS BDM Programmer works together with Digimaster 3, CKM100 or CKM200.
CAS BDM Programmer supported model:
MC68HC12D60, MC68HC12DX128, MC68HC9S12D64, MC68HC9S12 DX128, MC68HC9S12 DX256, MC68HC9S12 DX512.
Support until 2010 newest BMW CAS4.
2010 BMW 5er F07/F10/F11
2010 BMW 6er F13
2010 BMW 7er F01/F02/F03
BMW Easycoding
Konw More Detail Search:
Renault can clipv154
Posted by: UOBD2autel at
07:36 AM
| No Comments
| Add Comment
Post contains 417 words, total size 6 kb.
March 16, 2016
Posted by: UOBD2autel at
08:37 AM
| No Comments
| Add Comment
Post contains 1237 words, total size 10 kb.
March 11, 2016
Relation ECU or CarToolSearch:
Posted by: UOBD2autel at
07:57 AM
| No Comments
| Add Comment
Post contains 323 words, total size 3 kb.
March 10, 2016
Free DownloadFoxwell NT510update and get additional software PDF:
Foxwell NT510 reviews:
Foxwell NT510 Multi-System Scanner is the most cost-effective professional scan tool of the industry. It is a unique tool that delivers genuine coverage, depth and value for different car manufacturers.
Foxwell NT510 Support cars:
This is fromobdtool: Best car diagnostic tools for salewebsiteOriginal OBD Toolstechnical support:Foxwell NT510 update and get additional software
Posted by: UOBD2autel at
09:55 AM
| No Comments
| Add Comment
Post contains 108 words, total size 3 kb.
March 09, 2016
Posted by: UOBD2autel at
08:49 AM
| No Comments
| Add Comment
Post contains 592 words, total size 6 kb.
March 08, 2016
MoreOtherRelationAutoscannerProduct:Foxwell
MoreOtherRelationAutoscannerProduct:Foxwell
Posted by: UOBD2autel at
07:43 AM
| No Comments
| Add Comment
Post contains 712 words, total size 8 kb.
March 07, 2016
MoreOtherRelationAutoscannerProduct:Foxwell
Posted by: UOBD2autel at
07:46 AM
| No Comments
| Add Comment
Post contains 650 words, total size 9 kb.
March 03, 2016
RelationNewsSearch:Autel
MoreOtherRelationAutoscannerProduct:Foxwell
Problem before entering:
I am trying to change mileage on Volvo V50 2004 dash withdigiprog3odometer master clone v4.94.
I have downloaded a German version user manual and soldered 3 wires as shown in German manual (checked pin numbers). Adapter 51 has 4 wires. Pin 25 (white on original, or orange on clone) left unsoldered. I’m getting "ERROR INIT†message on screen. Processor is MC9S12DG128B. I selected HCS12 in digiprog 3.
What I’m doing wrong? Then I contacted my dealer. Theuobd2.nettechnician helped solve the trouble. It should work for whom hasDP3on this dash.
I checked the Volvo V50 HCS12 user manual withdigiprog iiiagain, and noticed that at least 4 wires, vss, vdd, tx and rx should be soldered.
I posted the attachment they provided.
VOLVO V50 TACHO
- Remove and disassemble tachometer.
- Connect as shown in the photo above the plug 51 with the marked soldering points. 3. PICTURES on the following page
- Select the program: cars / trucks -> VOLVO -> V50 HCS12.
- The DIGIPROG displays the old / wrong Mileage.
- Program and completed the new / correct Mileage.
NOTE: Pin-signal= end of white wire in first picture
The job needs good soldering/ desoldering skill. Lucky, the problem was settled.
RelationNewsSearch:Autel
MoreOtherRelationAutoscannerProduct:Foxwell
Posted by: UOBD2autel at
07:17 AM
| No Comments
| Add Comment
Post contains 231 words, total size 6 kb.
March 01, 2016
Original autoboss elite v30 super scanner is an extremely easy-to-use and powerful OBD-II tool for repairing business, technicians and DIYers. Here is the quickAUTOBOSS V30 automotive diagnostic scan tooloperation guide for beginners including update instructions.
Top 7 advantages of Autoboss v30 scanner:
- No computer needed
- No software installation
- With built-in printer
- Cover more than 57 makers, 40,000 vehicle systems
- Update online
- Many special test functions
- Navigation bar easy operation
First of all, check the package:
Autoboss v30 elitecomes with SD card, USB cables, battery cable, main cable, connecters, user manual, V30 scanner main unit, printing cable etc.
Universal built-in self mini printer allows to print out the diagnostics results (fault code information, data stream etc)
Simplify press on the power-on button to start up the device and wait a few seconds to load the system
MAIN MENU
Come to the main menu, each function tab can be easily glanced through the navigation bar
VERSION
Click "Version†Tab, you are allow to view the Autoboss V30 Elite scanner software version, hardware version and device S/N.
SETTINGS
Click "Settings†Tab, you are allowed to change language, self-check, set time etc
NOTE: V30 scanner language: English (Default), Spanish, French, Italian, German, Russian. English is default language, If you need other language, please provide Serial Number to open it.
USER MANUAL
Click "User Manual†option, the scanner will explain how to access each function, including device warning, change layout, built-in printer setup etc
DIAGNOSTIC
Click "Diagnostic†Tab, you are able to diagnose cars according to vehicle makers. AUTOBOSS E30 OBD2 scanner covers 57 makes, 40,000 vehicle systems. V30 is not just read& clear DTCs, it goes far beyond and accesses the complete vehicle, including: drive line, chassis, body, and the networking/communication modules.
Asia vehicle makes coverage:
America car model coverage:
European vehicle makes coverage:
China vehicle makes support:
SPECIAL TEST
Select "Special Test†function.Autoboss Elite V30is able to do special test for some models Renault, Kia, Hyundai, Toyota, Nissan, Volvo, Mercedes Benz and Fiat. You are able to replace component, reset adaptation data, reset air filter learned value after replacement, activate fuel pump etc for these vehicle models.
Here is also quick operation demo video for reference.
https://www.youtube.com/watch?v=Y3g7HrKIpw4
UPDATE
AUTOBOSS V30 supports one year free update, after that you need to pay 279USD/year.
How to update AutoBoss V30 Elite diagnostic super scanner?
You need to buyAutoboss V30/V30 Elite Security Cardfor one Year online update Global Version to renew the software.
- Log onAutoboss Official Website
- Download and install update client software
- Run client software
- Click "Renewal Setting†button
- Scathe panel to get security code
- Input product serial number, card number, security code
- Click "OK†button to finish
- Successfully complete, the expiration date will be automatically extended according to the subscription length on the card.
RelationNewsSearch:Autel
MoreOtherRelationAutoscannerProduct:Foxwell
Posted by: UOBD2autel at
11:03 AM
| No Comments
| Add Comment
Post contains 478 words, total size 13 kb.
February 29, 2016
RelationNewsSearch:
MoreOtherRelationAutoscannerProduct:Foxwell
BMW ICOM diagnostic and programming scanner for BMW, MINI Cooper and Rolls Royce has upgraded to third generation-ICOM A3. Then what’s the difference amongICOM A,ICOM A1,ICOM A2andICOM A3?
6 major differences are listed below:
- Appearance:
ICOM and ICOM A sharethe same appearance.
ICOM A3 designed with lightweight andsmallersize
All BWM ICOM system comes with three modules ICOM A, ICOM B and ICOM C
ICOM A – main adapter with OBD II connector for MOST, KCAN, DCAN
ICOM B – additional adapter for optic line, use USB connection with ICOM A
ICOM C – adapter for old vehicles with round 20-pin connector.
- ICOM Firmware/Hardware
ICOM A and ICOM A2 share the same firmware. Four firmware version optional: V1.1.8, V1.33 and V1.36, and new V1.38. Each version firmware update tool can be downloaded free here:
1.18 firmware update tool
http://down.uobd2.net/icom-and-icom-a1-and-icom-a2-v1.18-firmware-update-files.zip
1.33 firmware update tool
http://down.uobd2.net/icom-a1-a2-and-super-version-a2-v1.33-firmware-update-files.zip
1.36 firmware update tool
http://down.uobd2.net/icom-a1-a2-and-super-version-a2-v1.36-firmware-update-files.zip
1.38 firmware update tool
http://down.uobd2.net/icom-a1-a2-1.38-firmware-upgrade-files.zip
Best quality BMW ICOM A2 PCB display
ICOM A3 comes with firmware version: V1.37
The new ICOM A3 has a better built firmware which supports better heat dissipation feature and able to receive a significantly more powerful processor and more storage capacity. A3 comes with robust aluminum box will help to avoid damage in harsh environments when using.
3)ICOM Software:
ICOM A and ICOM A1 software:ISIS (ISTA-P) and ISID (ISTA-D), the latest version is: 2013.01.
ICOM A2 and ICOM A3 software:ISTA-D ISTA-P (or Rheingold version).
ICOM A2 current version: 2015.6V ISTA-D 3.49.30 ISTA-P 55.4.000
ICOM A3 current version: 2015.2V ISTA-D 3.48.10 ISTA-P 3.55.0.100
There will be newer software version released continually in the future.
ISIS/ISTA-D=diagnostic software
ISIS/ISTA-P= programming software
- Function:
ICOM A and ICOM A2 perform same function. But due to the old ICOM A module have problem in the cooling and protection design, ICOM A2 adopts the whole aluminum shell body, using aerial explosion-proof connector; and it use the joint connection line which similar to the Mercedes-Benz SDCONNECT COMPACT 4.
BWM ICOM A2 comes with Network cable, can do Fiber optical programming, but ICOM A3 does not contain Networkcable, can not do Fiber optical programming.
- Operating system
ICOM A: supportWin XP O/S only.
ICOM A1: Win XP and Win 7 64 bit O/S
ICOM A2: Win XP and Win 7 O/S
ICOM A3: Professional Win7 64 bit (NO Win XP)
6) Vehicle support
ICOM A2 and ICOM A3 cover the same BMW, MINI and Rolls Royce models.
In conclusion:
- The newest version ICOM A2 works better in cooling, runs faster and worksmore stable, not easierbroken than older ICOM.
- ICOM A3 can program all units for all BMW series expect media system.
- ICOM A3 work more stable and has stronger compatibility than ICOM A2, A1.
Relation NewsSearch:
MoreOtherRelationAutoscannerProduct:Foxwell
Posted by: UOBD2autel at
07:29 AM
| No Comments
| Add Comment
Post contains 481 words, total size 8 kb.
31 queries taking 0.0724 seconds, 97 records returned.
Powered by Minx 1.1.6c-pink.