The text below will explain how to use the wireless printing feature of originalAutel MaxiDAS DS708Automotive Diagnostic System. TheDS708scan tool is capable of printing out any graph, data, parameter ID list, or analog information directly to a personal computer connected to a printer wirelessly from anywhere in the shop.

NOTE:Your computer must be connected to the same network as yourscannerMaxiDAS DS708 wireless printing

Instruction:

Click onDS708PC SUITE V software

When you install the DS708 PC software

Click on DS708 printer application icon on your desktop

An icon similar to the software icon will appear in the lower taskbar right hand corner on your screen (see black arrow)

Double click the icon, and open sought press print

Repeat should be printed that reads test prep

Then ready to use the wireless printing feature

Connect theDS708 scannerto the wireless network

Select Setup/Help-> WIFI->Printer

Connected to your PC if you do not know how to connect your wireless network

Please click on lee Bowyer while using a tool

Go to screen you wish to print slut the camera icon in the upper right hand

A screen will open with the image file information

The same file will save to the screenshot folder on the SD card and can be accessed on a tool by going to the data managers green

Click Print button, equipment picture review slut Prince in the document will be sent to print

If you have more than one computer on the same network with Autel’s software installed, multiple "Print Servers” will display. Please click on the one you wish to pint from

Go back to review corporate see them in file by returning to the home to Crewe

Then going to data manager including on picture viewer on the top left

Click the tab recent images and you will be able to view in print

If you have any question ,please search:Autel DS708 FAQ

POSTED BY Autel Maxidas Ds708 http://www.autelmaxidasds708.net

Posted by: UOBD2autel at 02:11 AM | No Comments | Add Comment
Post contains 330 words, total size 5 kb.

more...

Posted by: UOBD2autel at 01:17 AM | No Comments | Add Comment
Post contains 194 words, total size 4 kb.

Autel Maxidas DS708 scanner reset Audi A4 EPC light

The EPC light came on vehicle may cause car violently start shaking. Here is an instruction on reset EPC light and enable Open / Close electric parking brake of Audi A4 with theAutel MaxiDAS DS708 diagnostic scan tool.

Instruction:

Connect the MaxiDAS DS708 scanner with vehicle

Power on the DS708 system

Select vehicle region: European

Select vehicle manufacturer: Audi

Autel MaxiDAS scan tool will read the VIN automatically

Select "Maintenance function” from main function menu

Select "Electronic parking brake (EPB)”

Turn ignition ON (very important)

Start electric parking brake and handbrake programming

Follow these steps to program:

---Start brake pad change (open brakes completely)

---Change brake pads

---End brake pad change (close brakes)

Follow the system prompts

Press "-1-” button to come to "Start brake pad change” program

Then the brakes are fully opened

Wait the brakes to be opened

Follow the system prompt, press "-2-” come to changing brake pads program

Close the brakes

Please wait the braked are locked

Fit wheels

Check the brake fluid, top it up if necessary

Brake pads replacement mode was successfully done/programmed

Back to the main menu and exit the autel ds708 software

DisconnectDS708 scanner with vehicle

Posted by: UOBD2autel at 02:14 AM | No Comments | Add Comment
Post contains 212 words, total size 2 kb.