May 16, 2016
Audi a6l 2.4 all key lost, use Xhorse VVDI Pro and VVDI2 make key
Audi A6l 2.4all key lostand I useVVDI2 key programmerby Xhorse Company to make key and remote key successfully, the following paragraphs are the detailed procedure, hope it helps.
Remove engine from Audi a6l 2.4
Open Engine cover, find out the Engine position, disassemble engine.
Remove the engine ECU
Take apart engine ECU.
Next is to read this 95320 chip.
Remove 95320 chip and put it on theVVDI proto read data.
OpenVVDI pro
Select type, manufacture and model
Click "Newâ€
Click "Readâ€
Successfully Read out data, click "Saveâ€.
Take out chip from VVDI Pro and desoder the chip back to the engine ECU.
Reinstall engineECUback to the Audi.
Open VVDI2 and click "Audi†option.
Select "Special functionâ€
Select "EEPROM data processing toolâ€
Firstly calculate CS code
Select "ECU Simons PPDIX – Reset component protection dataâ€
Click "Load†the load the data that read out just now, then click open.
This is CS code, take a picture to record it.
Next is to calculate it’s PIN code
Select "ECU Simons PPDIX – Security Access Codeâ€
Click "Load†again to load the file.
PIN code is read out, record PIN code with photograph.
The first step is prepared well.
Open VVDI2, click "Learning Keyâ€- "Audi A6/Q7†Option.
Input the CS and PIN code that read out by VVDI pro, then you will see the button "Learning Key†and "Generate dealer key†are enabled.
Put OEM chip and 8E chip into VVDI2 key programmer.
Click "Generate dealer keyâ€
Generate dealer key is done.
Next is to learning key
Disconnect the short insurance line.
Connect back
Take out the chip fromVVDI2and put it into ignition data coil.
Click "Learning Keyâ€
Open and close car door, turn on ignition, press down brake.
Click "Learning Keyâ€.
learning successfully.
Next is to read out EZS-KESSY(J51 EEPROM.
Click "okâ€, select Chip type 9S1201128, the aim to read EZS-KESSY(J51 EEPROM is to generate OEM remote control.
Save EZS-KESSY(J51 EEPROM.
Generate OEM remote control.
Vertical put remote controller on the coil of VVDI2.
Click "Openâ€
Following the prompt the put the remote controller, click "Nextâ€
Controller is generated successfully, assembled key and to test.
Test the key whether it can start the A6L.
The car can start.
Prepare to test Remote control.
Remote control is working.
Done.
MoreVVDI Product InformationVVDI ProgPlease Search:www.wobd2.com
VVDI Key Programmer for Mercedes Benz
Source:http://blog.wobd2.com/2016/05/15/audi-a6l-2-4-all-key-lost-use-xhorse-vvdi-pro-and-vvdi2-make-key/
Posted by: UOBD2autel at
07:58 AM
| No Comments
| Add Comment
Post contains 421 words, total size 14 kb.
36 queries taking 0.0447 seconds, 63 records returned.
Powered by Minx 1.1.6c-pink.